How To Fix Pfister Bathroom Sink Stopper

How to Fix a Pfister Bathroom Sink Stopper

A bathroom sink stopper is a small but essential part of your bathroom. It helps to keep water in the sink when you're not using it, and it also prevents debris from clogging the drain. If your Pfister bathroom sink stopper is not working properly, it can be a major inconvenience. Fortunately, fixing a Pfister bathroom sink stopper is a relatively easy task that can be completed in a few minutes.

Tools and Materials

Phillips head screwdriver
Flat head screwdriver
New Pfister bathroom sink stopper

Instructions

Turn off the water supply to the sink. This is located under the sink, and it is usually a small knob or lever. Once the water supply is turned off, open the faucet to release any remaining water in the line.
Remove the old stopper. Using a Phillips head screwdriver, remove the two screws that hold the stopper in place. Once the screws are removed, you should be able to pull the stopper straight up and out of the sink.
Clean the drain. Once the stopper is removed, you should clean the drain to remove any debris that may be clogging it. You can use a small brush or a piece of wire to clean the drain.
Install the new stopper. Insert the new stopper into the drain hole. Make sure that the stopper is fully seated in the hole, and then tighten the two screws that hold it in place.
Turn on the water supply to the sink. Once the stopper is installed, turn on the water supply to the sink. Check for leaks around the stopper. If there are any leaks, tighten the screws that hold the stopper in place.

Troubleshooting

If you are having trouble fixing your Pfister bathroom sink stopper, there are a few things you can check:

Make sure that the stopper is the correct size for your sink. If the stopper is too small, it will not fit properly in the drain hole and will leak. If the stopper is too large, it will not be able to fit through the drain hole.
Check the O-rings on the stopper. The O-rings are responsible for creating a watertight seal between the stopper and the drain. If the O-rings are damaged or worn, they will need to be replaced.
Make sure that the drain is not clogged. If the drain is clogged, water will not be able to flow through the stopper and it will leak. You can use a small brush or a piece of wire to clean the drain.

If you have tried all of the troubleshooting tips and you are still having trouble fixing your Pfister bathroom sink stopper, you may need to contact a plumber for assistance.