How To Fit Bathroom Basin Taps

How to Fit Bathroom Basin Taps Like a Pro

Upgrading your bathroom taps can transform the aesthetics and functionality of your space. While hiring a plumber is an option, fitting bathroom basin taps yourself is a manageable task that saves you money and offers a sense of accomplishment. Here's a step-by-step guide to help you through the process:

Step 1: Gather Necessary Tools and Materials

Before embarking on your project, gather the following tools and materials:

Basin taps
Wrenches (adjustable and basin)
Screwdriver (Philips head)
Plumber's putty
Teflon tape
Cleaning cloth

Step 2: Remove Existing Taps

Turn off the water supply to your bathroom. Place a towel under the basin to catch any dripping water. Use an adjustable wrench to disconnect the water supply hoses from the old taps. Unscrew the nuts holding the taps in place and carefully lift them off the basin.

Step 3: Clean the Basin and Taps

Clean the area where the new taps will be installed using a cleaning cloth. This ensures a proper seal. Wipe down the new taps to remove any dust or debris.

Step 4: Apply Plumber's Putty

Roll out a rope of plumber's putty and wrap it around the base of the new taps. This will create a watertight seal between the taps and the basin.

Step 5: Install the Taps

Place the new taps onto the basin, ensuring the putty forms a seal around the base. Tighten the nuts holding the taps in place using a basin wrench. Apply equal pressure to both nuts to prevent overtightening.

Step 6: Connect the Water Supply Hoses

Wrap Teflon tape around the threaded ends of the water supply hoses. This prevents leaks. Screw the hoses onto the corresponding inlets on the taps. Use an adjustable wrench to hand-tighten the connections.

Step 7: Test the Taps

Turn on the water supply and check for any leaks around the taps or hoses. If there are no leaks, you have successfully installed your new bathroom basin taps.