How To Remove A Pegasus Bathroom Faucet Cartridge

Replacing a bathroom faucet cartridge is a relatively straightforward task that can be completed in a few minutes. However, if you're not familiar with the process, it's important to understand the essential aspects of how to remove a Pegasus bathroom faucet cartridge. In this article, we will provide a step-by-step guide on how to remove a Pegasus bathroom faucet cartridge, as well as some tips for troubleshooting common problems. ### Tools and Materials Before you begin, you will need the following tools and materials: - Adjustable wrench or pliers - Phillips head screwdriver - Flat head screwdriver - Replacement cartridge - Lubricant ### Step-by-Step Instructions 1.

Turn off the water supply.

The first step is to turn off the water supply to the faucet. There will be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise until they are fully closed. 2.

Open the faucet.

Open the faucet to release any remaining water in the lines. 3.

Remove the handle.

Most Pegasus bathroom faucets have a handle that is held in place by a screw. Use a Phillips head screwdriver to remove the screw and then pull the handle straight off. 4.

Remove the cartridge cap.

The cartridge cap is located at the base of the faucet body. Use an adjustable wrench or pliers to loosen the cap and then remove it by hand. 5.

Remove the cartridge.

Once the cartridge cap is removed, you will be able to see the cartridge. Use a flat head screwdriver to pry the cartridge out of the faucet body. 6.

Inspect the cartridge.

Once the cartridge is removed, inspect it for any damage. If the cartridge is damaged, it will need to be replaced. 7.

Install the new cartridge.

If the cartridge is not damaged, you can install the new cartridge by inserting it into the faucet body and tightening it by hand. 8.

Reinstall the cartridge cap.

Once the new cartridge is installed, replace the cartridge cap by hand-tightening it. 9.

Reinstall the handle.

Finally, replace the handle by inserting it into the faucet body and tightening the screw. 10.

Turn on the water supply.

Once the handle is reinstalled, turn on the water supply and check for leaks. If there are any leaks, tighten the cartridge cap or the handle until the leaks stop. ### Troubleshooting If you encounter any problems while removing a Pegasus bathroom faucet cartridge, here are a few troubleshooting tips: - If you cannot loosen the cartridge cap, try using a penetrating lubricant. - If you cannot remove the cartridge, try using a pair of pliers to grip the cartridge and pull it out. - If you cannot install the new cartridge, try lubricating the cartridge and the faucet body. ### Conclusion Removing a Pegasus bathroom faucet cartridge is a simple task that can be completed in a few minutes. By following the steps in this guide, you can easily replace a damaged cartridge and restore your faucet to working order.