Replacing a Moen 2-Handle Bathroom Faucet
Replacing a Moen 2-handle bathroom faucet is a relatively simple home improvement task that can be completed in a few hours with the right tools and supplies. Here's a step-by-step guide to help you replace your faucet:
Materials You'll Need
- New Moen 2-handle bathroom faucet
- Adjustable wrench
- Phillips screwdriver
- Basin wrench (optional)
- Plumber's putty
- Teflon tape
Step 1: Turn Off the Water Supply
Before starting, turn off the water supply to the faucet. To do this, locate the shut-off valves under the sink and turn them clockwise until they are fully closed. Open the faucet handles to release any remaining water in the lines.
Step 2: Disconnect the Old Faucet
Use an adjustable wrench to loosen the nuts that hold the water supply lines to the faucet. Once loose, hand-tighten the nuts onto the new faucet. Next, use the basin wrench or pliers to remove the mounting nuts that hold the faucet to the sink. Once removed, lift the old faucet up and out of the sink.
Step 3: Apply Plumber's Putty
Apply a bead of plumber's putty to the bottom of the new faucet base. This will help seal the faucet to the sink and prevent leaks. Press the faucet into place on the sink, making sure it is level and aligned with the handles.
Step 4: Tighten the Mounting Nuts
Tighten the mounting nuts by hand as much as possible. Then, use the basin wrench or pliers to tighten the nuts further, alternating between the two sides to ensure even tightening. Do not overtighten the nuts, as this can damage the faucet.
Step 5: Reconnect the Water Supply Lines
Wrap the threads of the water supply lines with Teflon tape. Screw the lines onto the corresponding water supply valves and tighten them with an adjustable wrench. Make sure the lines are securely connected to prevent leaks.
Step 6: Install the Handles
Insert the handles onto the stems of the faucet. Tighten the handles by hand, then use the Phillips screwdriver to fully secure them. Make sure the handles are aligned and function smoothly.
Step 7: Turn on the Water Supply
Turn on the water supply valves under the sink. Check for any leaks around the faucet base or water supply lines. If there are no leaks, your new Moen 2-handle bathroom faucet is now installed and ready to use.
Tips for Success
- Always turn off the water supply before starting.
- Use the correct tools for the job.
- Tighten all nuts and connections securely, but do not overtighten.
- If you encounter any difficulties, consult a professional plumber.
- Regularly clean and maintain your faucet to extend its lifespan.
How Do I Replace My Moen Bathroom Faucet Cartridge
How To Fix A Dripping Moen Faucet Howtolou Com
Moen 2 Handle Replacement Cartridge 1224 The Home Depot
How To Remove Moen Bathroom Faucet Handle In 2 Steps
How To Install A Moen Centerset Faucet
Moen 2 Handle Replacement Cartridge 1224 The Home Depot
Thrifco 9400020 Aftermarket Lavatory Kitchen 2 Handle Rebuild Kit For Moen Cau Style Faucets Acrylic Handles Hot Cold With Plastic Stems Com
Moen Adler Double Handle Low Arc 4 In Centerset Bathroom Sink Faucet Watersense Certified Chrome Canadian Tire
4551 Guillens Com
Moen Wetherly Spot Resist Brushed Nickel Widespread 2 Handle Watersense Bathroom Sink Faucet With Drain In The Faucets Department At Com
Related Posts