Moen Banbury Bathroom Faucet Installation Instructions

Installing a new bathroom faucet can be a daunting task, but it's actually quite simple if you have the right instructions. In this guide, we'll walk you through the step-by-step process of installing a Moen Banbury bathroom faucet. With a little time and effort, you'll have your new faucet up and running in no time!

Tools and Materials You'll Need

Before you begin, gather the following tools and materials:

Adjustable wrench
Basin wrench
Phillips screwdriver
Flathead screwdriver
Plumber's putty
Teflon tape
New faucet
Faucet mounting hardware
Supply lines

Step-by-Step Installation Instructions

Step 1: Turn off the water supply

Before you begin, turn off the water supply to your bathroom. There should be two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water.

Step 2: Remove the old faucet

Use an adjustable wrench to loosen the nuts that hold the old faucet in place. Once the nuts are loose, you can remove the faucet from the sink.

Step 3: Clean the mounting surface

Once the old faucet is removed, clean the mounting surface of the sink. Remove any old plumber's putty or Teflon tape.

Step 4: Apply plumber's putty

Apply a bead of plumber's putty around the base of the new faucet. This will help to seal the faucet and prevent leaks.

Step 5: Install the new faucet

Place the new faucet in the mounting hole and tighten the nuts until they are snug. Do not overtighten the nuts, as this could damage the faucet.

Step 6: Connect the supply lines

Connect the supply lines to the hot and cold water valves under the sink. Use Teflon tape to seal the threads on the supply lines.

Step 7: Turn on the water supply

Turn on the water supply valves under the sink. Check for leaks around the base of the faucet and the supply lines.

Step 8: Test the faucet

Turn on the faucet and check that the water flows smoothly and that the temperature is correct. If you notice any leaks or problems, turn off the water supply and consult a plumber.

Congratulations! You have now successfully installed a new Moen Banbury bathroom faucet.