How To Remove A Double Handle Bathroom Faucet

How to Remove a Double Handle Bathroom Faucet

Replacing a double handle bathroom faucet is a relatively simple task that can be completed in a few hours. By following these step-by-step instructions, you can easily remove the old faucet and install a new one.

Tools Required:

Adjustable wrench
Phillips screwdriver
Allen wrench (if required)
Bucket or bowl
Plumber's tape

Step 1: Turn Off the Water Supply

Locate the water supply valves beneath the sink. Turn both valves clockwise to shut off the water supply.

Step 2: Open the Faucet

Turn on the handles to release any remaining water pressure in the lines.

Step 3: Remove the Handles

Use a Phillips screwdriver to remove the screws securing the handles to the faucet. Pull the handles straight off.

Step 4: Remove the Decorative Escutcheons

Beneath the handles, you'll find decorative escutcheons. These can usually be removed by hand or with an Allen wrench, if necessary.

Step 5: Remove the Mounting Nuts

Using an adjustable wrench, carefully loosen the mounting nuts that secure the faucet to the sink. Be cautious not to overtighten as you may damage the sink.

Step 6: Lift Out the Faucet

Once the mounting nuts are loosened, lift the faucet straight up to remove it from the sink.

Step 7: Clean the Sink Surface

Before installing the new faucet, take a moment to clean the sink surface where the old faucet was mounted.

Step 8: Install the New Faucet

Follow the instructions provided with the new faucet to install it correctly. Generally, this will involve placing the new faucet in the sink, securing it with the mounting nuts, and tightening the connecting hoses.