How To Remove A Glued Undermount Bathroom Sink

How to Remove a Glued Undermount Bathroom Sink

Undermount sinks are popular because they give a modern and streamlined look to your bathroom. However, if you need to remove one, it can be a bit more challenging than removing a drop-in sink. This is because undermount sinks are usually glued in place. Here are the steps on how to remove a glued undermount bathroom sink:

1. Turn off the water supply and disconnect the plumbing.

The first step is to turn off the water supply to the sink. You will also need to disconnect the plumbing, including the drain and water lines. Once the plumbing is disconnected, you can move on to the next step.

2. Remove the sealant around the sink.

The next step is to remove the sealant around the sink. You can use a utility knife to carefully cut the sealant. Once the sealant is removed, you can move on to the next step.

3. Heat the glue around the sink.

The next step is to heat the glue around the sink. You can use a heat gun or a hair dryer to do this. Once the glue is heated, it will soften and become easier to remove.

4. Pry the sink loose from the countertop.

The next step is to pry the sink loose from the countertop. You can use a putty knife or a flathead screwdriver to do this. Be careful not to damage the countertop or the sink.

5. Remove the sink.

Once the sink is loose, you can remove it from the countertop. You may need to lift and pull at the same time to get the sink out. Be careful not to drop the sink.

6. Clean the countertop and the sink.

The final step is to clean the countertop and the sink. You can use a degreaser to remove any remaining glue or sealant. Once the countertop and sink are clean, you can reinstall the sink.