How To Fix A Leaky Bathroom Faucet Delta

How to Fix a Leaky Bathroom Faucet Delta

Leaking faucets are not only annoying, but they can also waste a significant amount of water. If you have a leaky bathroom faucet Delta, there are a few things you can do to fix it yourself. Here is a step-by-step guide:

1. Turn off the water supply: Before you start working on the faucet, you need to turn off the water supply. There should be two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to close them.

2. Remove the aerator: The aerator is the small screen at the end of the faucet spout. It helps to create a more forceful stream of water and can become clogged with minerals over time. To remove the aerator, use a wrench to loosen it and then unscrew it by hand.

3. Inspect the O-rings: Once you have removed the aerator, you will see one or two O-rings. These O-rings create a watertight seal between the aerator and the faucet. If the O-rings are worn or damaged, they will need to be replaced.

4. Replace the O-rings: To replace the O-rings, simply remove the old ones and install the new ones. Make sure that the O-rings are seated properly before you tighten the aerator back onto the faucet.

5. Tighten the packing nut: The packing nut is located beneath the handle. It helps to create a watertight seal between the handle and the faucet body. To tighten the packing nut, use a wrench to turn it clockwise. Do not overtighten the packing nut, as this can damage the faucet.

6. Turn on the water supply: Once you have tightened the packing nut, turn on the water supply and check for leaks. If there are no leaks, your faucet is now fixed.

If you have followed all of the steps above and your faucet is still leaking, there may be a more serious problem that requires the help of a professional plumber.