Replacing A Bathroom Sink Faucet Cartridge

Replacing a Bathroom Sink Faucet Cartridge: Essential Considerations

Replacing a bathroom sink faucet cartridge is a relatively simple task that can be completed by most do-it-yourselfers. However, before beginning, it is essential to understand the different aspects of this task to ensure a successful replacement.

Here are some key aspects to consider when replacing a bathroom sink faucet cartridge:

Type of faucet: The type of faucet will determine the cartridge you need. There are two main types of faucets: compression faucets and cartridge faucets. Compression faucets use a washer to seal the water flow, while cartridge faucets use a cartridge that contains both the washer and the valve seat.
Cartridge size: Cartridges come in different sizes, so it is important to measure the old cartridge before purchasing a new one. The cartridge size is usually stamped on the side of the cartridge.
Tools needed: To replace a bathroom sink faucet cartridge, you will need a few basic tools, including a Phillips head screwdriver, an adjustable wrench, and a pair of needle-nose pliers.
Steps involved: The steps involved in replacing a bathroom sink faucet cartridge vary depending on the type of faucet. However, the general steps are as follows:
1. Turn off the water supply to the faucet.
2. Remove the handle(s) from the faucet.
3. Unscrew the cartridge retainer nut.
4. Remove the old cartridge and insert the new cartridge.
5. Tighten the cartridge retainer nut.
6. Reinstall the handle(s).
7. Turn on the water supply to the faucet and check for leaks.