How To Change A Bathroom Tub Faucet

How to Change a Bathroom Tub Faucet

Replacing a bathroom tub faucet is a relatively simple plumbing repair that most homeowners can complete in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber and ensure that your bathroom faucet is working properly.

Before You Start

Before you begin, you will need to gather the following tools and materials:

Adjustable wrench
Basin wrench
Phillips screwdriver
Flathead screwdriver
Plumber's putty
Teflon tape
New tub faucet

Step-by-Step Instructions

Turn off the water supply. The first step is to turn off the water supply to the bathroom. You can usually do this by turning the valves under the sink or by turning off the main water valve for the house.
Disconnect the old faucet. Once the water supply is turned off, you can disconnect the old faucet. To do this, use an adjustable wrench to loosen the nuts that hold the faucet in place. Be careful not to overtighten the nuts, as this can damage the faucet.
Remove the old faucet. Once the nuts are loosened, you can remove the old faucet from the sink. Be careful not to drop the faucet, as this can damage it.
Apply plumber's putty. Before installing the new faucet, you need to apply a bead of plumber's putty around the base of the faucet. This will help to seal the faucet and prevent leaks.
Install the new faucet. Place the new faucet in the sink and tighten the nuts that hold it in place. Be careful not to overtighten the nuts, as this can damage the faucet.
Connect the water supply. Once the new faucet is installed, you can connect the water supply. To do this, use a basin wrench to tighten the nuts that connect the water supply lines to the faucet.
Turn on the water supply. Once the water supply is connected, you can turn on the water supply and check for leaks. If there are any leaks, tighten the nuts until the leaks stop.

Tips

If you are not comfortable working with plumbing, it is best to hire a plumber to replace your bathroom tub faucet.
Be sure to turn off the water supply before you start working on the faucet.
Do not overtighten the nuts that hold the faucet in place, as this can damage the faucet.
If you have any questions, consult a qualified plumber.