How To Replace A Bathroom Pedestal Sink

How to Replace a Bathroom Pedestal Sink

Replacing a bathroom pedestal sink is a relatively simple task that can be completed in a few hours. With the right tools and materials, you can easily update the look of your bathroom and give it a fresh new look.

Materials Needed

* New pedestal sink * Plumber's putty * Adjustable wrench * Basin wrench * Pliers * Screwdriver * Hacksaw (optional) * Level * Caulk gun and caulk

Step-by-Step Instructions

1. Prepare the work area * Turn off the water supply to the sink. * Disconnect the water supply lines from the faucet. * Remove the drain stopper and lift the old sink off the pedestal. 2. Install the new pedestal * Set the pedestal in place and level it using a level. * Mark the location of the screw holes on the floor. * Remove the pedestal and drill pilot holes at the marked locations. * Secure the pedestal to the floor using screws. 3. Install the sink * Apply a bead of plumber's putty around the base of the sink. * Set the sink on top of the pedestal and press down firmly. * Tighten the nuts on the underside of the sink to secure it to the pedestal. 4. Reconnect the plumbing * Reattach the water supply lines to the faucet. * Install a new drain stopper. * Turn on the water supply and check for leaks. 5. Caulk the base * Apply a bead of caulk around the base of the sink where it meets the pedestal. * Smooth the caulk with your finger or a caulk tool.

Tips

* If the drain pipe is too short to reach the new sink, you may need to install an extension piece. * If the water supply lines are too long, you can cut them to length using a hacksaw. * Be sure to check for leaks after reconnecting the plumbing. * If you are not comfortable replacing the sink yourself, contact a licensed plumber for assistance.