How To Remove Bathroom Vanity And Sink

How to Remove Bathroom Vanity and Sink

When it's time to update your bathroom, removing the vanity and sink is one of the first steps. It may seem like a daunting task, but it's actually quite simple with the right tools and a little know-how. Here's a step-by-step guide to help you through the process.

Step 1: Gather Your Tools

Before you begin, gather the following tools:

Wrench
Adjustable wrench
Screwdriver
Hammer
Caulk gun
Caulk remover
Bucket

Step 2: Turn Off the Water

Start by turning off the water supply to the vanity. Locate the shut-off valves under the sink and turn them clockwise until they stop. Once the water is off, open the faucets to release any remaining water.

Step 3: Disconnect the Plumbing

Once the water is off, disconnect the plumbing. Use the wrench to loosen the nuts connecting the water supply lines to the sink. Be careful not to damage the lines.

Once the water supply lines are disconnected, use the adjustable wrench to loosen the nuts connecting the drain pipe to the sink. Remove the drain pipe.

Step 4: Remove the Vanity

With the plumbing disconnected, it's time to remove the vanity. Start by removing the screws or bolts holding the vanity to the wall. Then, carefully lift the vanity straight up and off the floor.

Step 5: Remove the Sink

If the sink is separate from the vanity, you will need to remove it separately. First, use the caulk remover to remove any caulk around the sink. Then, use the screwdriver to remove the screws holding the sink in place.

Once the screws are removed, carefully lift the sink straight up and off the countertop.

Step 6: Clean Up

Once the vanity and sink are removed, clean up the area. Use a bucket to collect any water or debris. Then, use a damp cloth to wipe down the floor and countertops.