How To Remove Drain Stop From Bathroom Sink

How to Remove a Drain Stop from a Bathroom Sink

If your bathroom sink is clogged, you may need to remove the drain stop to clear the blockage. Removing a drain stop is a relatively simple task that can be completed in a few minutes with the right tools.

Before you begin, gather the following tools:

Adjustable wrench
Pliers
Screwdriver
Flashlight

Once you have your tools, follow these steps to remove the drain stop:

Turn off the water supply to the sink. This will prevent water from spraying out of the drain when you remove the stop.

Place the adjustable wrench over the drain stop and loosen it. Turn the wrench counterclockwise until the stop is loose enough to remove by hand.

Remove the drain stop by hand. If the stop is stuck, you can use the pliers to gently pry it loose.

Inspect the drain stop for any blockages. If you find any hair, soap scum, or other debris, remove it.

Reinstall the drain stop. Tighten the stop by hand, and then use the adjustable wrench to tighten it further. Be sure not to overtighten the stop, as this could damage the sink.

Turn on the water supply to the sink and check for leaks. If you see any leaks, tighten the drain stop further.

If you are unable to remove the drain stop yourself, you may need to call a plumber. However, with the right tools and a little patience, you should be able to remove the drain stop and clear the blockage yourself.