How To Fix A Loose Bathroom Tap

A loose bathroom tap can be a frustrating problem, but it's one that can be easily fixed with a few simple tools. In this article, we'll walk you through the steps on how to fix a loose bathroom tap, so you can get your bathroom back in order in no time.

Tools You'll Need

Before you start, you'll need to gather a few tools. These include:

Allen wrench
Adjustable wrench
Plumber's tape
Replacement washer (if needed)

Step-by-Step Instructions

Once you have your tools, you can follow these step-by-step instructions to fix your loose bathroom tap:

Turn off the water supply to the tap. This is usually done by turning the valve under the sink.
Remove the aerator. The aerator is the small, screen-like device at the end of the tap. It can be removed by unscrewing it by hand or using an adjustable wrench.
Loosen the packing nut. The packing nut is the large nut that is located just below the aerator. It can be loosened by turning it counterclockwise with an adjustable wrench.
Remove the handle. The handle is usually held in place by a screw. Remove the screw and then pull the handle straight up.
Replace the washer. If the washer is worn or damaged, it will need to be replaced. To do this, simply remove the old washer and replace it with a new one.
Reassemble the tap. Reassemble the tap by following the steps in reverse order. Start by screwing on the packing nut, then tighten the handle screw. Finally, reattach the aerator.
Turn on the water supply and check for leaks. Once the tap is reassembled, turn on the water supply and check for any leaks. If there are any leaks, tighten the packing nut or replace the washer.

Conclusion

Fixing a loose bathroom tap is a simple task that can be completed in just a few minutes. By following the steps in this article, you can easily get your bathroom back in order and avoid any further problems.