How To Change A Bathroom Vanity Sink

How to Change a Bathroom Vanity Sink

Replacing a bathroom vanity sink is a fairly simple plumbing project that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber.

Tools and Materials You'll Need:

New bathroom vanity sink
Pliers
Wrench
Hack saw
Caulk gun
Caulk
Putty knife
Flashlight

Step-by-Step Instructions:

Turn off the water supply to the sink. There should be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water.
Disconnect the water supply lines. Use pliers to loosen the nuts that connect the water supply lines to the faucet. Once the nuts are loose, you can pull the water supply lines off of the faucet.
Disconnect the drain line. The drain line is the pipe that connects the sink to the drain. To disconnect the drain line, you will need to loosen the nuts that connect it to the sink. Once the nuts are loose, you can pull the drain line off of the sink.
Remove the old sink. Once the water supply lines and drain line are disconnected, you can remove the old sink. To do this, you will need to lift the sink up and off of the vanity. Be careful not to damage the vanity when you are removing the sink.
Install the new sink. To install the new sink, you will need to lift it up and into place on the vanity. Once the sink is in place, you will need to connect the water supply lines and drain line. To do this, you will need to tighten the nuts that connect the lines to the sink.
Caulk around the sink. Once the sink is installed, you will need to caulk around the edges of the sink to prevent water from leaking out. To do this, you will need to apply a bead of caulk around the edges of the sink and then smooth it out with your finger.
Turn on the water supply and check for leaks. Once the caulk is dry, you can turn on the water supply and check for leaks. If you see any leaks, you can tighten the nuts that connect the water supply lines and drain line to the sink until the leaks stop.

Conclusion:

By following these step-by-step instructions, you can easily change a bathroom vanity sink. This is a simple plumbing project that can be completed in a few hours, and it can save you the cost of hiring a plumber.