How To Replace A Light Fixture In Bathroom

Replacing a light fixture in the bathroom is a relatively simple task that can be completed in a few hours. By following these step-by-step instructions, you can safely and easily update the look of your bathroom.

Materials you'll need:

New light fixture
Screwdriver
Wire stripper
Electrical tape
Safety glasses

Step 1: Safety First

Before you begin, turn off the power to the light fixture at the circuit breaker or fuse box. This will prevent you from getting shocked.

Step 2: Remove the Old Fixture

Using a screwdriver, remove the screws that hold the old light fixture in place. Carefully pull the fixture down from the ceiling, being careful not to damage the wires.

Step 3: Disconnect the Wires

Once the fixture is removed, you will need to disconnect the wires. Use a wire stripper to strip about 1/2 inch of insulation from the ends of the wires. Twist the exposed wires together and secure them with electrical tape.

Step 4: Install the New Fixture

Lift the new light fixture into place and secure it to the ceiling with the screws provided. Connect the wires to the fixture, making sure to match the colors of the wires.

Step 5: Turn on the Power

Once the fixture is installed, turn on the power at the circuit breaker or fuse box. Test the light to make sure it is working properly.

Tips:

If you are not comfortable working with electricity, it is best to hire a licensed electrician.
Be sure to wear safety glasses when working with electrical fixtures.
If you are replacing a fluorescent light fixture, be sure to dispose of the old bulbs properly.
By following these step-by-step instructions, you can safely and easily replace a light fixture in your bathroom.