How To Fix Bathroom Tap Leak

How to Fix a Bathroom Tap Leak

A leaky bathroom tap is not only annoying, but it can also waste a lot of water and increase your water bills. Fortunately, fixing a tap leak is usually a relatively simple task that can be completed in a matter of minutes. Here are the steps on how to fix a bathroom tap leak:

1. Identify the Type of Tap Leak

The first step is to identify the type of tap leak you have. There are two main types of tap leaks:

Washer leaks: Washer leaks are caused by a worn or damaged washer, which is the rubber or plastic seal that sits between the tap body and the handle.
O-ring leaks: O-ring leaks are caused by a worn or damaged O-ring, which is a rubber seal that sits between the tap body and the spout.

2. Gather the Necessary Tools

Once you have identified the type of tap leak, you will need to gather the necessary tools to fix it. For most tap leaks, you will need the following tools:

Adjustable wrench
Allen wrench
Phillips screwdriver
Flathead screwdriver
Replacement washer or O-ring

3. Shut Off the Water Supply

Before you start working on the tap, you need to shut off the water supply. There should be a shut-off valve under the sink. Turn the valve clockwise to shut off the water.

4. Remove the Tap Handle

The next step is to remove the tap handle. This will vary depending on the type of tap you have. For most taps, you will need to use an Allen wrench or a Phillips screwdriver to remove the handle.

5. Replace the Washer or O-ring

Once you have removed the tap handle, you will be able to access the washer or O-ring. Remove the old washer or O-ring and replace it with a new one.

6. Reassemble the Tap

Once you have replaced the washer or O-ring, you can reassemble the tap. Start by attaching the handle to the tap body. Then, tighten the handle with the appropriate tool.

7. Turn on the Water Supply

Once the tap is reassembled, you can turn on the water supply. Check for leaks and make sure that the tap is working properly.

Additional Tips

If you are not comfortable fixing the tap leak yourself, you can call a plumber.
If the tap leak is coming from the base of the spout, it may be caused by a damaged O-ring. Replacing the O-ring is a simple task that can be completed in a few minutes.
If the tap leak is coming from the handle, it may be caused by a worn or damaged washer. Replacing the washer is also a simple task that can be completed in a few minutes.