How To Fix A Faucet In The Bathroom

How to Fix a Faucet in the Bathroom

A leaky bathroom faucet can be a real nuisance. Not only can it waste water and increase your water bill, but it can also be annoying to listen to. Fortunately, fixing a leaky faucet is a relatively simple task that can be completed in just a few minutes with the right tools and materials.

### Tools and Materials

To fix a leaky faucet, you will need the following tools and materials:

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
New faucet washer
Plumber's tape

### Step-by-Step Instructions

To fix a leaky faucet, follow these step-by-step instructions:

Turn off the water supply.

The first step is to turn off the water supply to the faucet. This is typically done by turning off the valves under the sink. 2.

Remove the aerator.

The aerator is the small screen at the end of the faucet spout. It can be removed by unscrewing it with your fingers or with a wrench. 3.

Remove the handle.

The handle of the faucet is held in place by a screw. Use a screwdriver to remove the screw and then lift off the handle. 4.

Remove the packing nut.

The packing nut is located below the handle. Use a wrench to loosen the packing nut and then remove it by hand. 5.

Remove the stem.

The stem is the part of the faucet that moves up and down to turn the water on and off. Use a wrench to loosen the stem and then pull it out of the faucet. 6.

Replace the washer.

The washer is a small rubber or plastic disc that creates a seal between the stem and the faucet body. Replace the old washer with a new one of the same size and shape. 7.

Reinstall the stem.

Insert the stem back into the faucet and tighten it with a wrench. 8.

Reinstall the packing nut.

Thread the packing nut back onto the stem and tighten it with a wrench. 9.

Reinstall the handle.

Slide the handle back onto the stem and tighten the screw. 10.

Reinstall the aerator.

Screw the aerator back onto the faucet spout. 11.

Turn on the water supply.

Turn on the valves under the sink to turn on the water supply to the faucet. 12.

Check for leaks.

Check the faucet for leaks. If there are any leaks, tighten the packing nut or replace the washer. ### Tips

Here are a few tips for fixing a leaky faucet:

If you are not comfortable working on plumbing, call a plumber.
Be careful not to overtighten the packing nut. This can damage the faucet.
If you are replacing the washer, make sure to use a washer of the same size and shape as the old one.
If you have a two-handle faucet, you may need to replace the washers in both handles.