How To Replace Undermount Sink In Bathroom

How to Replace an Undermount Sink in Your Bathroom

Replacing an undermount sink in your bathroom can be a relatively simple task that can be completed in a few hours with the right tools and materials. Here's a step-by-step guide to help you through the process:

Tools and Materials:

Replacement undermount sink
Faucet wrench
Pliers
Putty knife
Caulk gun
Caulk
Measuring tape
Level
Safety glasses

Step 1: Safety First

Before you begin, make sure to turn off the water supply to the sink and drain any remaining water. Put on safety glasses to protect your eyes from debris.

Step 2: Remove the Old Sink

Use a faucet wrench to disconnect the water supply lines from the faucet. Then, carefully lift the old sink out of the counter. Be mindful not to damage the countertop or the sink.

Step 3: Clean the Countertop

Use a putty knife to remove any old caulk or debris from the countertop where the sink was mounted. Clean the surface thoroughly with a damp cloth before applying new caulk.

Step 4: Install the New Sink

Apply a bead of caulk around the perimeter of the new sink. Carefully place the sink into the counter, ensuring that it is level. Use a level to check the alignment.

Step 5: Secure the Sink

Use clamps or heavy objects to hold the sink in place while the caulk dries. Allow the caulk to cure for the recommended time before using the sink.

Step 6: Reconnect the Faucet and Water Lines

Once the caulk is dry, reconnect the faucet and water lines to the new sink. Tighten the connections securely using a faucet wrench.

Step 7: Finishing Touches

Apply a thin bead of caulk around the edges of the sink where it meets the countertop. Use a damp cloth to smooth out the caulk and remove any excess. Allow the caulk to dry completely.

And there you have it! You have successfully replaced the undermount sink in your bathroom. Enjoy the new look and functionality of your updated sink.