Installing Drain In Bathroom Vanity

Installing a Bathroom Vanity Drain: A Step-by-Step Guide

Installing a drain in a bathroom vanity is a relatively simple task that can be completed in a few hours. However, it is important to follow the instructions carefully to ensure a proper installation. This guide will provide you with step-by-step instructions on how to install a drain in a bathroom vanity.

Materials Needed

Bathroom vanity drain
Slip joint pliers
Putty knife
Plumber's putty
Teflon tape

Step 1: Remove the Old Drain

Use slip joint pliers to loosen the old drain. Once the drain is loose, use your hands to remove it from the sink. If the old drain is stuck, use a putty knife to carefully pry it loose.

Step 2: Clean the Drain Hole

Use a damp cloth to clean the drain hole. Remove any old sealant or debris from the hole. This will ensure a good seal for the new drain.

Step 3: Apply Plumber's Putty

Roll a small piece of plumber's putty into a ball. Place the ball of putty around the base of the new drain. The putty should form a seal between the drain and the sink.

Step 4: Insert the Drain

Insert the new drain into the drain hole. Press down on the drain to secure it in place. Tighten the drain by hand until it is snug.

Step 5: Wrap the Drain with Teflon Tape

Wrap Teflon tape around the threads of the drain. The Teflon tape will help to create a watertight seal. Wrap the tape in the direction of the threads.

Step 6: Install the Drain Nut

Screw the drain nut onto the drain. Tighten the nut by hand until it is snug. Use slip joint pliers to further tighten the nut, but be careful not to overtighten it.

Step 7: Connect the Drain to the P-Trap

Connect the drain to the P-trap. The P-trap is the curved pipe that connects the drain to the sink waste pipe. Tighten the nuts on the P-trap by hand.

Step 8: Check for Leaks

Turn on the water and check for leaks. If there are any leaks, tighten the nuts on the drain and P-trap until the leaks stop.

Tips

Here are a few tips for installing a bathroom vanity drain:

Use a drain with a built-in overflow. This will help to prevent water from overflowing the sink.
Do not overtighten the drain nut. This can damage the drain or the sink.
If you are not comfortable installing the drain yourself, contact a plumber for assistance.