How To Change A Bathroom Basin Plug

How to Change a Bathroom Basin Plug

If your bathroom basin plug is broken or leaking, you can easily replace it yourself. Here's a step-by-step guide on how to do it:

Tools and Materials:

New basin plug
Wrench or pliers
Putty knife or scraper
Plumber's putty or silicone sealant

Steps:

Turn off the water supply: Under the sink, turn off the hot and cold water supply valves.
Remove the old plug: Using a wrench or pliers, carefully loosen the nut holding the plug in place. Then, remove the old plug by pulling it straight up.
Clean the drain hole: Use a putty knife or scraper to remove any old putty or debris from around the drain hole.
Apply plumber's putty or silicone sealant: Roll a small amount of plumber's putty or silicone sealant into a rope and shape it around the base of the new plug.
Insert the new plug: Push the new plug into the drain hole, ensuring that the putty or sealant is evenly distributed around the edges.
Tighten the nut: Hand-tighten the nut onto the plug until it's snug. Use the wrench or pliers to further tighten the nut, but avoid overtightening.
Turn on the water supply: Turn on the hot and cold water supply valves under the sink to check for leaks.
Clean up excess sealant: If there is any excess sealant around the plug, wipe it away with a damp cloth.

Tips:

If you have a pop-up drain, you may need to remove the drain assembly before replacing the plug.
Use the same type of plug and nut that were originally installed.
Tighten the nut securely, but avoid overtightening as this can damage the plug or basin.
Let the sealant dry completely before using the basin.

Changing a bathroom basin plug is a quick and easy task that can save you the cost of calling a plumber. By following these steps and using the right tools, you can ensure a leak-free basin and a fresh, functional bathroom.