How To Regrout A Bathroom Sink

Regrouting a bathroom sink is a relatively simple task that can be completed in a few hours. By following these steps, you can restore your sink to its original condition.

Materials You'll Need:

Grout removal tool
Grout float
New grout
Grout sealer
Sponge
Bucket
Water

Instructions:

1. Remove the old grout. Use a grout removal tool to carefully remove the old grout from the joints between the tiles. Be careful not to damage the tiles.

2. Clean the joints. Once the old grout has been removed, clean the joints with a sponge and water. Make sure to remove all of the dust and debris.

3. Mix the new grout. Mix the new grout according to the manufacturer's instructions. The grout should be the consistency of peanut butter.

4. Apply the grout. Use a grout float to apply the grout to the joints between the tiles. Be sure to press the grout firmly into the joints.

5. Remove the excess grout. Once the grout has been applied, use a damp sponge to remove the excess grout from the tiles. Be careful not to remove too much grout, or you will weaken the bond between the tiles.

6. Allow the grout to dry. Allow the grout to dry for at least 24 hours before using the sink.

7. Seal the grout. Once the grout has dried, apply a grout sealer to protect it from water damage.

By following these steps, you can easily regrout your bathroom sink and restore it to its original condition.