How To Change A Washer On Hot Bathroom Tap

Washers are an essential part of any tap, as they help to create a watertight seal between the tap body and the spout. Over time, washers can become worn or damaged, leading to leaks. If you're experiencing a leak from your hot bathroom tap, it's likely that the washer needs to be replaced.

Replacing a washer on a hot bathroom tap is a relatively simple task that can be completed in a few minutes. Here's a step-by-step guide on how to do it:

Step 1: Turn Off the Water Supply

Before you start working on the tap, it's important to turn off the water supply. This will prevent any water from leaking out while you're working.

Step 2: Remove the Tap Handle

Once the water supply is turned off, you need to remove the tap handle. This is usually done by unscrewing a small screw that is located on the underside of the handle.

Step 3: Remove the Cartridge

Once the tap handle is removed, you need to remove the cartridge. The cartridge is the part of the tap that contains the washer. To remove the cartridge, simply unscrew it from the tap body.

Step 4: Replace the Washer

Once the cartridge is removed, you can replace the washer. To do this, simply remove the old washer and replace it with a new one. Make sure that the new washer is the same size and shape as the old one.

Step 5: Reassemble the Tap

Once the new washer is in place, you can reassemble the tap. To do this, simply screw the cartridge back into the tap body and then replace the tap handle.

Step 6: Turn On the Water Supply

Once the tap is reassembled, you can turn on the water supply. Check for leaks around the tap. If there are no leaks, then you have successfully replaced the washer.

Tips

Here are a few tips to make the process of replacing a washer on a hot bathroom tap easier:

Use a pair of pliers to remove the tap handle. This will help to prevent damage to the handle.
Be careful not to overtighten the cartridge when you reassemble the tap. Overtightening can damage the cartridge.
If you're not sure what size washer you need, take the old washer to a hardware store and ask for help finding a replacement.