Fitting A Bathroom Sink Tap

Fitting A Bathroom Sink Tap - A Comprehensive Guide

Replacing a bathroom sink tap is a relatively straightforward task that can be completed in a few hours. By following these step-by-step instructions, you can ensure a successful installation.

Step 1: Gather Your Materials

Before you begin, gather all the necessary materials, including a new bathroom sink tap, adjustable wrench, basin wrench, plumber's putty, Teflon tape, and a bucket.

Step 2: Turn Off the Water Supply

Locate the stopcock or isolation valves under the sink and turn off both the hot and cold water supply. Open the taps to release any remaining water.

Step 3: Disconnect the Old Tap

Using the adjustable wrench, loosen the mounting nuts located under the sink and disconnect the tap from the water supply lines. Be cautious not to damage the pipes.

Step 4: Prepare the New Tap

Apply a thin layer of plumber's putty around the base of the new tap and wrap Teflon tape around the threads of the water supply lines.

Step 5: Fit the New Tap

Carefully insert the new tap into the sink hole and secure it with the mounting nuts. Tighten the nuts using the basin wrench, ensuring the tap is securely fastened.

Step 6: Connect the Water Supply Lines

Hand-tighten the water supply lines to the corresponding valves on the tap. Avoid overtightening to prevent damage.

Step 7: Turn On the Water Supply

Slowly turn on the water supply and check for any leaks. If necessary, tighten the connections or adjust the plumber's putty.

Step 8: Finish the Installation

Open the taps and allow water to run through to flush out any debris. Regularly check for leaks and adjust as needed. Congratulations! You have successfully fitted your bathroom sink tap.

Tips for Success

Use a basin wrench specifically designed for working in tight spaces under the sink.
Check the water supply lines and tap connections regularly for any signs of wear or damage.
If you encounter any difficulties, do not hesitate to seek professional assistance from a qualified plumber.