How To Remove A Bathroom Vanity Cabinet

How to Remove a Bathroom Vanity Cabinet

Removing a bathroom vanity cabinet may seem like a daunting task, but with a little preparation and the right tools, it can be completed in a few hours. Here is a step-by-step guide to help you through the process.

Safety First

Before you begin, turn off the water supply to the sink and close the drain. Cover the drain with a rag to prevent small parts from falling into it. Wear gloves to protect your hands from sharp edges and debris.

Gather Your Tools

You will need the following tools:

Adjustable wrench or basin wrench
Phillips screwdriver
Flathead screwdriver
Utility knife
Hammer
Pry bar
Bucket or garbage bag

Disconnect the Plumbing

Start by disconnecting the water supply lines from the sink faucets. Use an adjustable wrench or basin wrench to loosen the nuts on the water lines. Be careful not to overtighten or damage the nuts.

Next, disconnect the drain lines from the sink. Place a bucket or garbage bag under the sink to catch any water that may drain out.

Remove the Sink

Once the plumbing is disconnected, you can remove the sink. Use a flathead screwdriver to loosen the clips that hold the sink in place. Gently lift the sink up and off the vanity cabinet.

Remove the Mirror and Backsplash

If your vanity has a mirror and backsplash, remove them before removing the cabinet. Use a Phillips screwdriver to remove the screws that hold the mirror and backsplash in place. Carefully lift the mirror and backsplash off the cabinet.

Detach the Cabinet from the Wall

Most vanity cabinets are attached to the wall with screws or bolts. Use a screwdriver or wrench to remove the fasteners that connect the cabinet to the wall.

Lift the Cabinet Off the Floor

Once the cabinet is detached from the wall, you can lift it off the floor. If the cabinet is heavy, have someone help you lift it. Be careful not to damage the floor or the cabinet.

Remove the Cabinet from the Room

Once the cabinet is off the floor, you can remove it from the room. Be careful not to hit any walls or fixtures as you carry the cabinet out.

Tips for Removing a Bathroom Vanity Cabinet

Take pictures of the plumbing connections before you disconnect them. This will help you reconnect them correctly later.
If you are replacing the vanity cabinet, measure the space where the old cabinet was located before you purchase a new one.
If the vanity cabinet is glued to the floor, you may need to use a utility knife to cut the glue.
Be patient and take your time. Removing a bathroom vanity cabinet can be a challenging task, but it is possible to do it yourself with a little effort.