How To Install Widespread Bathroom Sink Faucet

How to Install a Widespread Bathroom Sink Faucet

Installing a widespread bathroom sink faucet can be a straightforward task that can be completed in a few hours with the right tools and preparation. Here is a step-by-step guide to help you through the process:

Materials and Tools

Widespread bathroom sink faucet
Wrench
Pliers
Plumber's putty
Measuring tape
Phillips screwdriver
Basin wrench

Step 1: Prepare the Sink

Turn off the water supply to the sink. Disconnect the old faucet by unscrewing the nuts that hold it in place. Clean the sink surface where the new faucet will be installed using a damp cloth.

Step 2: Measure and Mark the Holes

Measure the distance between the center of the hot and cold water supply lines. Mark the corresponding holes on the sink deck using a measuring tape and pencil.

Step 3: Install the Faucet Base Plates

Place the faucet base plates over the marked holes. Apply plumber's putty to the bottom of the plates to create a watertight seal. Tighten the nuts that secure the base plates.

Step 4: Install the Faucet Handles

Insert the faucet handles into the base plates. Secure them in place with the included screws using a Phillips screwdriver.

Step 5: Connect the Supply Lines

Connect the hot and cold water supply lines to the corresponding connectors on the faucet base. Tighten the nuts using a wrench.

Step 6: Install the Pop-Up Drain

Place the pop-up drain assembly in the sink drain hole. Secure it by tightening the lock nut from underneath the sink. Install the lift rod and lever.

Step 7: Check for Leaks

Turn on the water supply and check for any leaks around the faucet base, supply lines, and drain. If there are any leaks, tighten the connections as needed.

Tips

Use a basin wrench to tighten the nuts on the supply lines to avoid damaging the lines.
Apply thread sealant to the supply line threads for added leak protection.
If your sink is made of granite or another hard material, you may need to drill pilot holes before installing the faucet base plates.
Refer to the manufacturer's instructions for specific installation guidelines.