How To Change Bathroom Sink Drain Cover

How to Change a Bathroom Sink Drain Cover

A bathroom sink drain cover can become clogged with hair, soap scum, and other debris over time, leading to slow drainage or even complete blockage. Fortunately, changing a bathroom sink drain cover is a relatively simple task that can be completed in just a few minutes.

Materials You'll Need:

New drain cover
Adjustable wrench or pliers
Screwdriver (optional)

Step-by-Step Instructions:

1. Remove the Drain Cover:

Use an adjustable wrench or pliers to loosen the nut that secures the drain cover in place. Once the nut is loose, lift off the drain cover.

2. Clean the Drain Hole:

Before installing the new drain cover, remove any debris or buildup from the drain hole. You can use a small brush or a pair of tweezers to clean the hole.

3. Install the New Drain Cover:

Align the new drain cover with the drain hole and place it over the hole. Secure the drain cover by tightening the nut with the wrench or pliers. Be careful not to overtighten the nut.

4. Secure the Drain Cover (Optional):

Some drain covers have a small screw that can be used to secure them further. If your drain cover has a screw, insert the screw into the hole on the side of the drain cover and tighten it with a screwdriver.

5. Test the Drain Cover:

Turn on the water and let it run for a few minutes to test the drain cover. Make sure that the water drains properly and that there are no leaks around the drain cover.

Tips:

If you cannot loosen the nut with a wrench or pliers, you can try using a rubber strap wrench or penetrating oil.
If the drain hole is badly clogged, you may need to use a drain snake or chemical drain cleaner to clear the clog before installing the new drain cover.
Replace the drain cover regularly, especially if you have long hair or frequently use hair products that can clog the drain.