How Do You Fix A Kohler Bathroom Sink Stopper

Kohler bathroom sink stoppers are designed to prevent water from draining out of the sink. They are typically made of rubber or plastic and fit into the drain hole at the bottom of the sink. Over time, sink stoppers can become worn or damaged, which can cause them to leak or fail to stop water from draining. If your Kohler bathroom sink stopper is not working properly, there are a few things you can do to try to fix it.

1. Clean the stopper. The first step is to clean the stopper and the drain hole. Remove the stopper from the drain and clean it with soap and water. Use a toothbrush or other small brush to clean the inside of the drain hole. Once the stopper and drain hole are clean, rinse them thoroughly with water.

2. Inspect the stopper for damage. Once the stopper and drain hole are clean, inspect the stopper for damage. Look for any cracks, tears, or other signs of damage. If the stopper is damaged, it will need to be replaced.

3. Reinstall the stopper. If the stopper is not damaged, reinstall it in the drain hole. Make sure that the stopper is seated properly in the drain hole and that it is tight. Turn on the water and check for leaks. If the stopper is still leaking, you may need to replace it.

4. Replace the stopper. If the stopper is damaged or if it is still leaking after you have cleaned it and reinstalled it, you will need to replace it. You can purchase a new Kohler bathroom sink stopper at most hardware stores or online. To replace the stopper, simply remove the old stopper from the drain hole and insert the new stopper. Make sure that the new stopper is seated properly in the drain hole and that it is tight.

By following these steps, you should be able to fix a Kohler bathroom sink stopper that is not working properly. If you are still having problems, you may need to call a plumber for assistance.