How To Repair A Loose Bathroom Floor Tile

How to Repair a Loose Bathroom Floor Tile

Loose tiles in your bathroom floor are not just an aesthetic issue; they can also pose a safety hazard. A loose tile can easily break, creating sharp edges that can cut your feet. Loose tiles can also cause water to seep into the subfloor, leading to rot and mold growth. Fortunately, repairing a loose bathroom floor tile is a relatively easy task that can be completed in a few hours.

1. Gather Your Tools and Materials

Before you begin, you will need to gather the following tools and materials:

Scraper
Putty knife
Thin-set mortar
Notched trowel
Grout
Grout float
Sponge
Bucket

2. Remove the Loose Tile

Using the scraper, carefully pry up the loose tile. Be careful not to damage the surrounding tiles. Once the tile is removed, use the putty knife to scrape away any old thin-set mortar from the subfloor.

3. Apply Thin-Set Mortar

Spread a thin layer of thin-set mortar onto the subfloor using the notched trowel. Be sure to follow the manufacturer's instructions for mixing the thin-set mortar.

4. Set the Tile

Place the tile on top of the thin-set mortar and press down firmly. Use a level to ensure that the tile is level with the surrounding tiles.

5. Grout the Tile

Once the thin-set mortar has dried, apply the grout to the joints between the tiles using the grout float. Be sure to follow the manufacturer's instructions for mixing the grout.