How To Level Upstairs Bathroom Floor

Leveling Upstairs Bathroom Floor: A Comprehensive Guide

Uneven floors can not only be unsightly but also pose a safety hazard. If the floor in your upstairs bathroom is not level, it is important to level it before installing new flooring or making any other changes. Leveling an upstairs bathroom floor is a relatively simple project that can be completed in a weekend with the right tools and materials.

Materials You Will Need:

Level
Self-leveling compound
Mixing bucket
Drill
Mixing paddle
Notched trowel
Float
Safety glasses
Respirator
Gloves

Instructions:

1. Prepare the Floor: Remove any existing flooring and baseboards. Clean the subfloor thoroughly and remove any dirt, debris, or old adhesive. Repair any damaged areas of the subfloor. 2. Determine the Low and High Points: Use a level to find the lowest and highest points on the subfloor. These points will be used to guide the self-leveling compound when it is poured. 3. Mix the Self-Leveling Compound: Follow the manufacturer's instructions to mix the self-leveling compound. Be sure to use a drill with a mixing paddle to ensure a smooth and lump-free mixture. 4. Pour the Self-Leveling Compound: Start pouring the self-leveling compound at the lowest point on the subfloor. Use a notched trowel to spread the compound evenly over the floor. Work your way towards the highest point, smoothing the compound with a float as you go. 5. Remove Air Bubbles: As you pour and smooth the compound, use a rolling pin or spike roller to remove any air bubbles. This will help to create a smooth and even surface. 6. Allow the Compound to Level: Allow the self-leveling compound to level for at least 24 hours. Do not walk on or disturb the floor during this time. 7. Install New Flooring: Once the self-leveling compound has cured, you can install new flooring. Follow the manufacturer's instructions for installing the flooring. Tips: - Wear safety glasses, a respirator, and gloves when mixing and pouring the self-leveling compound. - Work in a well-ventilated area. - Pour the self-leveling compound slowly and evenly. - Allow the compound to level completely before walking on or installing new flooring.