How To Replace Your Bathroom Sink Stopper

Replacing a bathroom sink stopper is a relatively simple plumbing task that can be completed in a few minutes. Here's a step-by-step guide on how to do it:

Materials You'll Need

New sink stopper
Pliers or a wrench
Plumber's putty
Flashlight (optional)
Safety glasses (optional)

Step-by-Step Instructions

Turn off the water supply. Locate the water supply valves under the sink and turn them off. If you can't find the valves, turn off the main water supply to your home.
Remove the old stopper. Most sink stoppers are held in place by a nut or bolt. Use pliers or a wrench to loosen the nut or bolt and remove the stopper.
Clean the drain. Once the stopper is removed, use a flashlight to inspect the drain for any debris or buildup. Clean the drain with a drain cleaner or a simple solution of baking soda and vinegar.
Apply plumber's putty. Roll a small amount of plumber's putty into a rope and apply it around the base of the new stopper. The plumber's putty will help to seal the stopper and prevent leaks.
Insert the new stopper. Align the new stopper with the drain and insert it into place. Tighten the nut or bolt to secure the stopper.
Turn on the water supply. Slowly turn on the water supply and check for leaks. If you see any leaks, tighten the nut or bolt further.

Tips

If you have a pop-up stopper, you may need to remove the linkage or lever that connects the stopper to the drain.
If you have a sink with multiple drains, you may need to replace the stopper for each drain.
If you are not comfortable replacing the stopper yourself, you can call a plumber for assistance.

Conclusion

Replacing a bathroom sink stopper is a straightforward task that can be completed in a few minutes. By following these step-by-step instructions, you can easily replace the stopper and get your sink back in working order.