How To Put On A New Bathroom Faucet

How to Put on a New Bathroom Faucet

Updating your bathroom faucet is a great way to give your space a fresh, new look. It's also a relatively simple project that you can easily do yourself with a few basic tools. Here's a step-by-step guide to help you get started.

Step 1: Gather Your Tools and Materials

Before you start, make sure you have all the necessary tools and materials. You'll need a new faucet, adjustable wrench, basin wrench, Teflon tape, and a bucket or bowl to catch any water that drips out.

Step 2: Shut Off the Water Supply

Once you have everything you need, start by shutting off the water supply to your bathroom. There should be a shut-off valve under the sink. Turn it clockwise to shut off the water.

Step 3: Remove the Old Faucet

Next, use the adjustable wrench to loosen the nuts that hold the old faucet in place. Be careful not to overtighten the nuts, as this can damage the faucet. Once the nuts are loose, you can remove the old faucet.

Step 4: Install the New Faucet

Now it's time to install the new faucet. First, apply a few wraps of Teflon tape to the threads of the faucet. This will help to create a watertight seal. Then, insert the faucet into the sinkhole and hand-tighten the nuts.

Step 5: Connect the Water Lines

Once the faucet is in place, it's time to connect the water lines. Use the basin wrench to tighten the nuts that hold the water lines in place. Again, be careful not to overtighten the nuts.

Step 6: Turn on the Water Supply

Once the water lines are connected, you can turn on the water supply. Check for any leaks. If you see any leaks, tighten the nuts until the leak stops.

Step 7: Clean Up

Once the faucet is installed and there are no leaks, you can clean up your work area. Wipe down the sink and faucet with a clean cloth to remove any water or debris.