How To Fix Bathroom Tap Washer

Fixing a bathroom tap washer is an essential plumbing repair that can help prevent leaks and save water. The washer is a small rubber or plastic disk that sits inside the tap and creates a seal against the valve seat. Over time, the washer can become worn or damaged, which can cause the tap to leak. To fix a bathroom tap washer, you will need the following tools: * Adjustable wrench Adjustable pliers * Screwdriver * New tap washer Once you have gathered your tools, follow these steps: 1. Turn off the water supply to the tap. 2. Open the tap to release any remaining water. 3. Use the adjustable wrench to loosen the packing nut on the tap handle. 4. Pull the handle off the tap. Use the screwdriver to remove the screw that holds the washer in place. 6. Remove the old washer and replace it with the new one. 7. Reassemble the tap and turn on the water supply. If the tap is still leaking, you may need to replace the valve seat. The valve seat is a metal ring that the washer seals against. Over time, the valve seat can become worn or damaged, which can cause the tap to leak. To replace the valve seat, you will need to remove the tap handle and packing nut. Then, you can use a screwdriver to remove the valve seat. Replace the old valve seat with the new one and reassemble the tap. By following these steps, you can fix a bathroom tap washer and prevent leaks. This is an essential plumbing repair that can save you water and money.