How To Install Drain Bathroom Sink

How to Install a Bathroom Sink Drain

Installing a bathroom sink drain is a relatively simple task that can be completed in a few easy steps. With the right tools and a little bit of know-how, you can have your sink drain up and running in no time.

Step 1: Gather Your Tools

Before you begin, you will need to gather the following tools:

Adjustable wrench
Plumber's putty
New drain assembly
Bucket
Rags

Step 2: Remove the Old Drain

To remove the old drain, use an adjustable wrench to loosen the locknut that is holding it in place. Once the locknut is loose, you can unscrew the drain assembly and remove it from the sink.

Step 3: Apply Plumber's Putty

Before installing the new drain, apply a bead of plumber's putty around the base of the drain flange. This will help to create a watertight seal and prevent leaks.

Step 4: Install the New Drain

Insert the new drain assembly into the sinkhole and tighten the locknut until it is snug. Do not overtighten the locknut, as this could damage the sink or the drain assembly.

Step 5: Test the Drain

Once the drain is installed, run water into the sink and check for leaks. If you see any leaks, tighten the locknut further until the leak stops.

Step 6: Clean Up

Once the drain is installed and tested, clean up any excess plumber's putty and rags. Your new bathroom sink drain is now installed and ready to use.

Tips:

If you are not comfortable installing the drain yourself, you can hire a plumber to do it for you.
Be sure to use a new drain assembly that is the correct size for your sink.
Do not overtighten the locknut, as this could damage the sink or the drain assembly.
If you see any leaks, tighten the locknut further until the leak stops.