How To Remove A Bathroom Sink Stopper For Cleaning

Bathroom sink stoppers are essential for preventing water from draining out of the sink, but they can also be a breeding ground for bacteria and mildew. That's why it's important to clean your bathroom sink stopper regularly. Here's a step-by-step guide on how to do it:

Step 1: Gather your supplies.

You will need a pair of pliers, a screwdriver, and a cleaning brush.

Step 2: Turn off the water supply.

Locate the water supply valves under the sink and turn them off. This will prevent water from spraying out when you remove the stopper.

Step 3: Remove the drain cover.

Most drain covers are held in place by a few screws. Use a screwdriver to remove the screws and lift off the drain cover.

Step 4: Remove the stopper.

Use a pair of pliers to grasp the stopper and pull it straight up. The stopper may be stuck, so you may need to use some force.

Step 5: Clean the stopper.

Use a cleaning brush to scrub the stopper with a mild dish soap and water. Rinse the stopper thoroughly and dry it with a clean towel.

Step 6: Reinstall the stopper.

Insert the stopper back into the drain hole and push it down until it is seated. Tighten the screws to hold the drain cover in place.

Step 7: Turn on the water supply.

Turn on the water supply valves under the sink and check for leaks. If there are any leaks, tighten the screws on the drain cover until the leak stops.

Your bathroom sink stopper is now clean and ready to use!