How To Remove A P Trap Bathroom Sink

P-traps are a necessary part of any bathroom sink. They prevent sewer gases from escaping into your home, and they also help to keep your sink from becoming clogged. Over time, however, P-traps can become clogged with hair, soap scum, and other debris. When this happens, it's important to know how to remove and clean the P-trap so that your sink can continue to function properly.

Fortunately, removing a P-trap is a relatively simple task that can be completed in just a few minutes.

### Tools You'll Need: - Bucket - Rags - Adjustable wrench - Plumber's putty ### Steps: 1.

Turn off the water supply to the sink.

This is typically done by turning off the valves under the sink. 2.

Place a bucket under the P-trap to catch any water that may leak out.

Loosen the slip nuts on the P-trap.

There will be two slip nuts, one on each side of the P-trap. Use an adjustable wrench to loosen the slip nuts, but do not remove them completely. 4.

Gently pull the P-trap down.

Be careful not to spill any water from the P-trap. 5.

Clean the P-trap.

Use a rag to remove any hair, soap scum, or other debris from the P-trap. You may also want to use a degreaser to clean the P-trap. 6.

Apply a new layer of plumber's putty to the slip nuts.

This will help to create a watertight seal when the P-trap is reattached. 7.

Reattach the P-trap.

Slide the P-trap back into place and tighten the slip nuts. Do not overtighten the slip nuts, as this can damage the P-trap. 8.

Turn on the water supply to the sink.

Check for leaks. If you see any leaks, tighten the slip nuts until the leak stops. ### Tips: - If you are having trouble loosening the slip nuts, you can use a penetrating oil to help loosen them. - If the P-trap is badly clogged, you may need to use a drain snake to clear the clog. - If you are not comfortable removing the P-trap yourself, you can call a plumber for assistance.