How Do You Put A Drain In Bathroom Sink

How to Install a Bathroom Sink Drain

Installing a bathroom sink drain is a relatively simple plumbing project that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber.

Tools and Materials

Before you begin, gather the following tools and materials:

Adjustable wrench
Slip-joint pliers
Putty knife
Plumber's putty
New drain assembly
Washer
Nut

Step 1: Remove the Old Drain

Place a bucket beneath the sink to catch any water that may leak out. Use the adjustable wrench to loosen the nut that holds the drain in place. Once the nut is loose, use the slip-joint pliers to remove the drain assembly from the sink.

Step 2: Clean the Sink Hole

Use the putty knife to remove any old plumber's putty from the sink hole. Clean the hole with a damp cloth to remove any debris.

Step 3: Apply Plumber's Putty

Roll a small piece of plumber's putty into a snake-like shape. Place the putty around the base of the new drain assembly.

Step 4: Insert the Drain Assembly

Insert the drain assembly into the sink hole. Tighten the nut by hand until it is snug. Use the adjustable wrench to further tighten the nut, but do not overtighten.

Step 5: Install the Washer and Nut

Place the washer over the drain assembly. Thread the nut onto the assembly and tighten it by hand. Use the adjustable wrench to further tighten the nut, but do not overtighten.

Step 6: Test the Drain

Turn on the water and check for any leaks. If there are any leaks, tighten the nut further. Once the drain is leak-free, you can remove the bucket and enjoy your new drain.