How To Install A Faucet In Bathroom Sink

Installing a new faucet in your bathroom sink is a great way to update the look of your bathroom and save money on plumbing costs. With a few simple tools and a little time, you can easily install a new faucet yourself. Here are the essential steps on how to install a faucet in bathroom sink:

Tools and Materials

Adjustable wrench
Basin wrench
Plumber's putty
Teflon tape
Faucet

Step 1: Remove the old faucet

1. Turn off the water supply to the sink. 2. Open the faucet to release any remaining water. 3. Using an adjustable wrench, loosen the nuts that hold the faucet in place. 4. Once the nuts are loose, you can remove the faucet by pulling it straight up.

Step 2: Clean the sink

Once the old faucet is removed, you need to clean the sink. Remove any old plumber's putty or Teflon tape from the surface of the sink. You can use a damp cloth or a mild cleaner to clean the sink.

Step 3: Apply plumber's putty

Plumber's putty is a sticky substance that helps to seal the gap between the faucet and the sink. Roll out a rope of plumber's putty and apply it to the underside of the faucet base. Make sure that the putty is applied evenly around the entire base of the faucet.

Step 4: Wrap Teflon tape around the threads

Teflon tape is a thin, white tape that helps to seal the threads on the faucet. Wrap the Teflon tape around the threads of the faucet, starting at the bottom and working your way up. Make sure that the tape is applied tightly and evenly.

Step 5: Install the faucet

Once the plumber's putty and Teflon tape are applied, you can install the faucet.
1. Position the faucet over the sinkhole and align the holes in the faucet base with the holes in the sink. 2. Insert the bolts through the holes and tighten them using a basin wrench. 3. Make sure that the faucet is tight, but do not overtighten the bolts.

Step 6: Connect the water supply lines

The last step is to connect the water supply lines to the faucet. Locate the hot and cold water supply lines under the sink and connect them to the corresponding connections on the faucet. Make sure that the connections are tight and there are no leaks.

Step 7: Turn on the water supply

Once the water supply lines are connected, you can turn on the water supply to the sink. Check for any leaks around the faucet. If you see any leaks, tighten the connections until the leaks stop.

Conclusion

Installing a new faucet in your bathroom sink is a relatively simple task that can be completed in a few hours. By following these steps, you can easily install a new faucet and save money on plumbing costs.