Bathroom Sink Not Draining After Snake

Bathroom Sink Not Draining After Snake? Here's What to Do

If you've recently snaked your bathroom sink and it's still not draining, don't panic. There are a few other things you can try to clear the clog. Here are a few of the most common solutions:

1. Check the P-Trap

The P-trap is the curved section of pipe under the sink that holds water to create a seal and prevent sewer gases from escaping. Over time, hair, soap scum, and other debris can build up in the P-trap and cause a clog. To clean the P-trap, place a bucket under it and loosen the slip nuts that hold it in place. Carefully remove the P-trap and clean out any debris. Be sure to replace the P-trap correctly to avoid leaks.

2. Use a Chemical Drain Cleaner

If the clog is caused by organic matter, such as hair or soap scum, a chemical drain cleaner may be effective. Follow the directions on the bottle carefully and be sure to wear gloves and eye protection. Pour the drain cleaner down the drain and let it sit for the amount of time specified on the bottle. Then, flush the drain with hot water.

3. Use a Plunger

A plunger can be an effective way to clear a clog in a bathroom sink. Fill the sink with enough water to cover the plunger cup. Place the plunger over the drain and pump it up and down vigorously. The suction created by the plunger will help to dislodge the clog.

4. Call a Plumber

If you've tried all of the above methods and your bathroom sink is still not draining, it's time to call a plumber. A plumber will have the tools and experience to identify and clear the clog quickly and efficiently.

5. Preventative Measures

To prevent future clogs, it's important to take a few preventative measures. Here are a few tips:

Install a drain strainer to catch hair and other debris.
Avoid pouring grease or oil down the drain.
Flush the drain with hot water regularly to help dissolve soap scum and other buildup.
If you have hard water, install a water softener to help prevent mineral buildup in the pipes.