Delta Bathroom Faucet Leaks At Base When Turned On

Fixing Delta Bathroom Faucet Leaks At Base When Turned On

Delta bathroom faucets are popular for their durability and style. However, even the best faucets can develop leaks over time. One common leak point is at the base of the faucet, where the base plate meets the sink. This leak can be a nuisance, as it can drip water onto the countertop and floor. It can also lead to water damage if left unrepaired. Fortunately, fixing a Delta bathroom faucet leak at the base is a relatively simple task. With the right tools and a little bit of time, you can get your faucet back in working order in no time. ### What You'll Need * Adjustable wrench * Phillips head screwdriver * Flathead screwdriver * Plumber's putty * O-rings (if necessary) ### Step-by-Step Instructions 1.

Turn off the water supply.

The first step is to turn off the water supply to the faucet. This will prevent any water from leaking out while you're working on it. To turn off the water supply, locate the shut-off valves under the sink. Turn the valves clockwise to close them. 2.

Remove the aerator.

The aerator is the small screen that's attached to the end of the faucet spout. It helps to aerate the water and create a more even flow. To remove the aerator, use a pair of pliers to loosen it. Once it's loose, you can unscrew it by hand. 3.

Remove the handle.

The handle is attached to the faucet body by a screw. Use a Phillips head screwdriver to remove the screw. Once the screw is removed, you can pull the handle off of the faucet body. 4.

Remove the base plate.

The base plate is the metal plate that's attached to the sink. It's held in place by four screws. Use a flathead screwdriver to remove the screws. Once the screws are removed, you can lift the base plate off of the sink. 5.

Inspect the O-rings.

The O-rings are rubber gaskets that create a watertight seal between the base plate and the sink. Over time, O-rings can become worn or damaged, which can cause leaks. Inspect the O-rings for any signs of damage. If the O-rings are damaged, you'll need to replace them. 6.

Apply plumber's putty.

Plumber's putty is a pliable sealant that's used to create a watertight seal between the base plate and the sink. Apply a bead of plumber's putty around the base of the base plate. 7.

Reinstall the base plate.

Place the base plate back onto the sink. Make sure that the plumber's putty is evenly distributed around the base of the base plate. Tighten the four screws to secure the base plate in place. 8.

Reattach the handle.

Slide the handle back onto the faucet body. Tighten the screw to secure the handle in place. 9.

Reinstall the aerator.

Screw the aerator back onto the end of the faucet spout. Tighten it with a pair of pliers. 10.

Turn on the water supply.

Turn the shut-off valves under the sink counterclockwise to turn the water supply back on. Check for any leaks. If there are no leaks, your faucet is now fixed. ### Conclusion Fixing a Delta bathroom faucet leak at the base is a relatively simple task. By following the steps outlined in this article, you can get your faucet back in working order in no time.