Fitting Bathroom Basin Taps

Fitting Bathroom Basin Taps: A Comprehensive Guide

Upgrading or replacing bathroom basin taps is a relatively straightforward task that can enhance the aesthetics and functionality of your bathroom. This guide will provide a comprehensive overview of the essential aspects involved in fitting bathroom basin taps, empowering you to confidently complete the project.

Gathering Materials and Tools

New basin taps
Wrenches (adjustable and basin)
Plumber's putty or silicone sealant
Teflon tape
Towels or cloths
Basin wrench (if necessary)

Preparatory Steps

Turn off the water supply to the basin using the isolation valves underneath.
Open the taps to release any remaining water.
Place towels or cloths around the base of the taps to catch any water or debris.

Removing Existing Taps

Use the adjustable wrench to loosen the nuts holding the taps in place under the basin.
Disconnect the water supply lines from the taps.
Remove the old taps by carefully lifting them straight up.

Preparing the New Taps

Wrap Teflon tape clockwise around the threads of the water supply lines.
Apply a bead of plumber's putty or silicone sealant around the base of the new taps.

Fitting the New Taps

Position the new taps in the holes in the basin.
Tighten the nuts under the basin using the adjustable wrench.
Connect the water supply lines to the taps.

Final Checks and Adjustments

Turn on the water supply and check for leaks around the taps and water supply lines.
Adjust the taps as needed to ensure a comfortable water flow and temperature.
Wipe away any excess sealant or water.

Additional Considerations

If your basin has a pop-up waste, connect the waste rod to the new taps before fitting them.
Tighten the nuts securely but avoid overtightening, as this can damage the taps or the basin.
Use a basin wrench if the nuts are difficult to reach from under the basin.

By following these steps carefully, you can successfully fit bathroom basin taps, providing a fresh and functional update to your bathroom.