How Do I Change A Washer On Bathroom Sink Tap

A dripping tap can be a constant source of annoyance and can waste a lot of water. If you have a dripping tap in your bathroom, it is important to fix it as soon as possible. One of the most common causes of a dripping tap is a worn washer. Replacing a washer is a relatively simple task that can be completed in a few minutes.

To change a washer on a bathroom sink tap, you will need the following tools:

Adjustable wrench

Phillips head screwdriver

New washer

Once you have gathered your tools, follow these steps:

Turn off the water supply to the sink. There should be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water.

Open the tap to release any remaining water in the lines.

Use the adjustable wrench to loosen the packing nut. The packing nut is located just below the handle of the tap. Loosen the nut by turning it counterclockwise.

Use the Phillips head screwdriver to remove the handle from the tap. There will be one or two screws holding the handle in place. Remove the screws and lift the handle off the tap.

Use your fingers to remove the old washer from the tap. The washer is a small, rubber or plastic disc that sits inside the tap.

Place the new washer on the tap. Make sure that the washer is seated properly and that it is not twisted.

Reassemble the tap by reversing the steps above.

Turn on the water supply to the sink and check for leaks.

If you have followed these steps correctly, your tap should no longer be dripping. If the tap is still dripping, there may be another problem that needs to be addressed.

Here are some additional tips for changing a washer on a bathroom sink tap:

If you are not sure what size washer you need, take the old washer to a hardware store and compare it to the new washers.

When you are tightening the packing nut, be careful not to overtighten it. If you overtighten the nut, you could damage the tap.

If you are having trouble removing the old washer, you can use a pair of pliers to grip it.

If you are still having trouble changing the washer, you can call a plumber for help.

Changing a washer on a bathroom sink tap is a simple task that can be completed in a few minutes. By following these steps, you can save yourself the cost of calling a plumber.