How Do You Fix A Leaky Bathroom Faucet Handle

How to Fix a Leaky Bathroom Faucet Handle

A leaky faucet handle is not only annoying, but it can also waste a significant amount of water and increase your water bills. While fixing a leaky faucet handle may seem like a daunting task, it is actually quite easy to do with the right tools and instructions. Here is a step-by-step guide on how to fix a leaky bathroom faucet handle:

Tools Required:

Flathead screwdriver
Phillips head screwdriver
Allen wrench (if necessary)
Replacement washer or O-ring
Plumber's putty or Teflon tape
Wrench or pliers

Instructions:

Step 1: Turn off the water supply. Locate the water supply valves under the sink and turn them off. This will prevent water from flowing out of the faucet while you are working on it.

Step 2: Remove the handle. Use a flathead screwdriver to pry off the cap located at the base of the handle. Once the cap is removed, use a Phillips head screwdriver or Allen wrench to loosen and remove the handle.

Step 3: Inspect the washer or O-ring. Once the handle is removed, you will see a washer or O-ring located at the base of the faucet stem. Inspect the washer or O-ring for any signs of damage or wear. If the washer or O-ring is damaged, it will need to be replaced.

Step 4: Replace the washer or O-ring. If the washer or O-ring needs to be replaced, use a pair of pliers or a wrench to remove the old washer or O-ring. Apply a small amount of plumber's putty or Teflon tape to the new washer or O-ring and install it in the faucet.

Step 5: Reassemble the faucet. Apply a small amount of plumber's putty or Teflon tape to the threads of the faucet stem. Insert the stem back into the faucet and tighten it securely using a wrench or pliers.

Step 6: Turn on the water supply. Go back to the water supply valves under the sink and turn them back on. Check for any leaks around the handle. If there are no leaks, your faucet handle is now fixed.

Additional Tips:

If you are not comfortable working on your faucet, it is always best to call a licensed plumber.
Be sure to use the correct type of washer or O-ring for your faucet. Using the wrong size or type of washer or O-ring can cause leaks.
If you notice any leaks after reassembling the faucet, tighten the packing nut located at the base of the stem. Be careful not to overtighten the packing nut, as this could damage the faucet.