How Do You Replace A Bathroom Sink

How To Replace A Bathroom Sink

Replacing a bathroom sink may seem like a daunting task, but it’s a relatively straightforward project that can be completed in a few hours with the right tools and materials. Whether you’re simply updating the look of your bathroom or replacing a damaged sink, following these steps will ensure a successful installation.

Essential Tools and Materials

Before you begin, gather the following tools and materials:

New bathroom sink
Basin wrench
Adjustable wrench
Putty knife
Plumber's putty or caulk
Faucet
Teflon tape
Drain assembly
Level

Step 1: Remove the Old Sink

Turn off the water supply to the sink and disconnect the faucet lines. Use a basin wrench to loosen and remove the nuts holding the sink to the countertop. Carefully lift the sink and remove it from the countertop.

Step 2: Clean the Countertop

Use a putty knife to remove any old putty or caulk around the sink opening. Clean the countertop thoroughly to ensure a good seal for the new sink.

Step 3: Apply Plumber's Putty or Caulk

Apply a bead of plumber's putty or caulk around the underside of the new sink's rim. This will help create a watertight seal between the sink and the countertop.

Step 4: Position the New Sink

Carefully place the new sink onto the countertop, aligning it properly. Press down on the sink to ensure it is seated securely.

Step 5: Level the Sink

Use a level to check if the sink is level. If not, adjust the putty or caulk underneath the sink until it is level.

Step 6: Install the Faucet

Wrap Teflon tape around the threads of the faucet. Insert the faucet into the sink hole and tighten the nuts to secure it. Connect the faucet lines.

Step 7: Install the Drain Assembly

Apply plumber's putty or caulk to the underside of the drain flange. Insert the drain assembly into the sink hole and tighten the nut to secure it. Connect the drain pipe.

Step 8: Reconnect Water Supply

Turn on the water supply to the sink. Check for leaks around the sink and faucet.

Conclusion

Replacing a bathroom sink is a simple project that can be completed in a few hours. By following these steps and using the right tools and materials, you can ensure a successful installation and a fresh, updated look for your bathroom.