How Do You Replace A Nutone Bathroom Fan Light Bulb Replacement

Replacing a Nutone bathroom fan light bulb is a simple task that can be completed in a few minutes. Here are the steps on how to do it:

1. Safety first

Before you start, turn off the power to the bathroom fan at the circuit breaker. This will prevent you from getting shocked.

2. Remove the light cover

The light cover is usually held in place by two screws. Remove the screws and carefully lift the light cover off.

3. Remove the old light bulb

The old light bulb is usually held in place by a twist-lock mechanism. Simply twist the bulb counterclockwise and it will come out.

4. Insert the new light bulb

Take the new light bulb and insert it into the socket. Turn the bulb clockwise until it is hand-tight.

5. Replace the light cover

Carefully place the light cover back over the light bulb and secure it with the screws.

6. Turn on the power

Go back to the circuit breaker and turn the power back on. The new light bulb should now be working.

Tips

Use a flashlight to help you see inside the light fixture if necessary.
Do not touch the new light bulb with your bare hands, as the oils from your skin can shorten the life of the bulb.
If you are having trouble removing the old light bulb, you can try using a pair of needle-nose pliers.
Be careful not to overtighten the screws when replacing the light cover.