How Long To Replace Bathroom Sink Fixtures And Drain

Replacing bathroom sink fixtures and drains is a common home improvement project that can be completed in a few hours. The time it takes to replace these fixtures will vary depending on the type of fixtures being replaced, the condition of the existing fixtures, and the skill level of the person doing the work. However, by following these steps, you can complete this project quickly and efficiently.

Steps on How to Replace Bathroom Sink Fixtures and Drains

1. Gather your tools and materials. You will need a new sink fixture, a new drain, a wrench, a screwdriver, and a putty knife.

2. Turn off the water supply. This is usually done by turning off the water valves under the sink. If there are no valves under the sink, you will need to turn off the main water supply to your home.

3. Disconnect the old sink fixture. Use the wrench to loosen the nuts that hold the fixture in place. Once the nuts are loose, you can pull the fixture off the sink.

4. Remove the old drain. Use the screwdriver to remove the screws that hold the drain in place. Once the screws are removed, you can pull the drain out of the sink.

5. Install the new drain. Place the new drain in the sink and tighten the screws to hold it in place.

6. Install the new sink fixture. Place the new sink fixture on the sink and tighten the nuts to hold it in place. Make sure that the fixture is level before you tighten the nuts all the way.

7. Turn on the water supply. Check for leaks around the fixture and the drain. If there are no leaks, you can finish the job by caulking around the fixture.

Conclusion

Replacing bathroom sink fixtures and drains is a relatively simple project that can be completed in a few hours. However, it is always important to follow the steps carefully to avoid any problems. By following these tips, you can complete this project quickly and efficiently.