How To Change A Bathroom Vent Fan Motor

Bathroom Vent Fan Motors can go bad over time, but they are relatively easy to replace. With a few simple tools and a little bit of time, you can have your bathroom vent fan back up and running in no time.

Tools You'll Need:

Phillips head screwdriver
Flat head screwdriver
Replacement bathroom vent fan motor

Steps:

1. Turn off the power to the bathroom vent fan at the circuit breaker or fuse box. 2. Remove the vent fan cover. The vent fan cover is usually held in place by a few screws. Remove the screws and carefully remove the cover. 3. Disconnect the wires from the old motor. The wires are usually connected to the motor with wire nuts. Twist the wire nuts counterclockwise to loosen them and disconnect the wires. 4. Remove the old motor. The old motor is usually held in place by a few screws. Remove the screws and carefully remove the motor. 5. Install the new motor. Place the new motor in the housing and secure it with the screws. 6. Connect the wires to the new motor. Connect the wires to the motor with wire nuts. Twist the wire nuts clockwise to tighten them. 7. Reinstall the vent fan cover. Carefully replace the vent fan cover and secure it with the screws. 8. Turn on the power to the bathroom vent fan at the circuit breaker or fuse box. 9. Test the vent fan to make sure it is working properly.

Tips:

Before you start, make sure you have all of the necessary tools and materials.
If you are not comfortable working with electricity, it is best to call a qualified electrician.
Be careful when working with sharp objects.