How To Change A Broan Bathroom Fan Motor

When it comes to home repairs, replacing a bathroom fan motor may not seem like a top priority. However, a faulty motor can lead to several problems, such as poor ventilation, increased moisture, and even mold growth. Fortunately, changing a Broan bathroom fan motor is a relatively simple task that can be completed in a few hours with the right tools and materials.

In this article, we will provide a step-by-step guide on how to change a Broan bathroom fan motor. We will also discuss the essential aspects to consider when choosing a new motor, such as size, power, and noise level.

Before you begin, it is important to gather the necessary tools and materials. You will need a screwdriver, a pair of pliers, a wire cutter, and a new bathroom fan motor. Once you have all of the necessary tools and materials, you can follow the steps below to change the motor.

Step 1: Turn Off the Power

The first step is to turn off the power to the bathroom fan. You can do this by flipping the circuit breaker or removing the fuse that powers the fan. Once the power is off, you can proceed to the next step.

Step 2: Remove the Fan Grille

The next step is to remove the fan grille. The grille is typically held in place by a few screws. Once you have removed the screws, you can pull the grille off to expose the fan motor.

Step 3: Disconnect the Wires

Once the grille is removed, you will need to disconnect the wires that are connected to the fan motor. Use a pair of pliers to gently squeeze the terminals on the wires and pull them off of the motor. Be careful not to damage the wires or the motor.

Step 4: Remove the Motor

Once the wires are disconnected, you can remove the motor from the fan housing. The motor is typically held in place by a few screws. Once you have removed the screws, you can pull the motor out of the housing.

Step 5: Install the New Motor

Now you can install the new motor into the fan housing. Line up the motor with the mounting holes and insert the screws. Tighten the screws until the motor is secure.

Step 6: Connect the Wires

Once the motor is installed, you need to connect the wires to the motor terminals. Be sure to connect the wires to the correct terminals. The black wire should be connected to the black terminal, the white wire should be connected to the white terminal, and the green wire should be connected to the green terminal.

Step 7: Reinstall the Fan Grille

Once the wires are connected, you can reinstall the fan grille. Simply align the grille with the mounting holes and insert the screws. Tighten the screws until the grille is secure.

Step 8: Turn On the Power

Finally, you can turn on the power to the bathroom fan. The fan should now be working properly.

Changing a Broan bathroom fan motor is a relatively simple task that can be completed in a few hours with the right tools and materials. By following the steps outlined in this article, you can easily replace a faulty motor and ensure that your bathroom fan is working properly.