How To Change A Sink Faucet In The Bathroom

How to Change a Sink Faucet in the Bathroom: A Step-by-Step Guide

Replacing a sink faucet might seem like a daunting task, but it's surprisingly straightforward with the right tools and guidance. Here's an easy-to-follow guide to help you get started.

Gather Your Tools:

Adjustable wrench or basin wrench
Pliers
New sink faucet
Plumber's putty or caulk
Bucket or bowl
Flashlight (optional)

Step 1: Shut Off Water Supply

Locate the water supply valves beneath the sink. Usually, there are two valves, one for hot water and one for cold water. Turn both valves clockwise to shut off the water supply.

Step 2: Disconnect Old Faucet

Place a bucket or bowl under the sink to catch any water that might spill out.
Use an adjustable wrench to loosen the nuts securing the water supply lines to the old faucet.
Carefully detach the water supply lines and move them out of the way.
Use a wrench or pliers to loosen the mounting nuts that hold the faucet in place.
Pull the old faucet up and out of the sink.

Step 3: Apply Plumber's Putty

Take a piece of plumber's putty or caulk and roll it into a rope shape. Place the rope around the base of the new faucet where it will meet the sink.

Step 4: Install New Faucet

Insert the new faucet into the sink hole and align it. Press down gently to distribute the putty or caulk evenly.
Tighten the mounting nuts by hand as much as possible.
Use an adjustable wrench or pliers to tighten the nuts further, but avoid overtightening.

Step 5: Reconnect Water Supply Lines

Attach the water supply lines to the corresponding ports on the new faucet. Tighten the nuts securely using a wrench.
Hand-tighten the nuts as much as possible before using a wrench to further tighten them.

Step 6: Turn On Water Supply

Return to the water supply valves under the sink and slowly turn both valves counterclockwise to turn on the water supply. Check all connections for leaks and tighten any nuts if necessary.

Step 7: Inspect and Test

Turn on the faucet and let the water run for several minutes to flush out any debris.
Check for leaks around the faucet base, water supply lines, and drain.
If any leaks occur, tighten the corresponding nuts or replace the putty or caulk as needed.

And that's it! You've successfully replaced your bathroom sink faucet. If you encounter any difficulties, don't hesitate to reach out to a qualified plumber for assistance.