How To Change A Washer On Bathroom Hot Water Tap

How to Change a Washer on a Bathroom Hot Water Tap

If your bathroom hot water tap is leaking, it may be necessary to replace the washer. This is a relatively simple repair that can be completed in a few minutes with the right tools and materials.

Tools and Materials

* Adjustable wrench * Screwdriver * New washer * Plumber's grease

Instructions

Turn off the water supply.

Locate the shut-off valves under the sink and turn them clockwise to close. 2.

Open the tap.

This will release any remaining water pressure in the line. 3.

Unscrew the handle.

Use an adjustable wrench to loosen the packing nut around the base of the handle. Once loosened, remove the handle. 4.

Remove the packing nut.

Use an adjustable wrench to loosen the packing nut, which is located just below the handle. Once loosened, remove the packing nut. 5.

Remove the old washer.

The old washer will be located at the bottom of the stem assembly. Use a screwdriver to pry the old washer off. 6.

Apply plumber's grease to the new washer.

This will help to create a seal and prevent leaks. 7.

Insert the new washer.

Place the new washer on the stem assembly and press it into place. 8.

Reassemble the tap.

Replace the packing nut and tighten it with an adjustable wrench. Next, replace the handle and tighten it with an adjustable wrench. 9.

Turn on the water supply.

Slowly open the shut-off valves under the sink to turn the water back on. 10.

Check for leaks.

Run the hot water tap to check for any leaks. If there are any leaks, tighten the packing nut or handle further.

Tips

* If the washer is difficult to remove, you can use a pair of pliers to gently pry it off. * Be careful not to overtighten the packing nut or handle, as this can damage the tap. * If you are not comfortable replacing the washer yourself, you can call a plumber for assistance.

Conclusion

Replacing a washer on a bathroom hot water tap is a simple repair that can be completed in a few minutes with the right tools and materials. By following these instructions, you can save yourself the cost of hiring a plumber.